Warning: 5 installation mistakes that cause bathroom mirrors to deteriorate quickly

Bathroom mirrors are almost a must-have detail in any bathroom. A beautiful, durable and properly installed mirror will help the space become brighter, more comfortable and luxurious. However, in reality, many families accidentally make basic installation mistakes, causing the mirror to quickly deteriorate, the wall to become moldy or unsafe to use.

This article will show 5 common mistakes when installing bathroom mirrors – with analysis of the harm and solutions to help you avoid losing money.

Hanging the mirror too high or too low compared to the sink

This is a very common mistake, especially when installing the mirror yourself without measuring carefully. The mirror is installed too high, causing the user to have to reach, and the reflected image is not visible enough. The mirror is installed too low, making the mirror edge quickly deteriorate and moldy.

Consequence:

• Inconvenient to examine, especially for children or the elderly.
• Mirror gets dirty easily, hard to clean bottom edge.
• Out of balance with the overall space of the sink.

How to fix:

• Measure the user's height in advance, especially the average height of the family members.
• The distance from the sink surface to the bottom of the mirror should be 20-30 cm.
• If installing mirrors for spas or hotels, mirrors should be of universal height, enough for all users.

Skip the anti-moisture treatment on the back of the mirror

The bathroom is a very humid environment, water vapor easily sticks to the back of the mirror. If the silver coating or moisture-proof paint is not up to standard, the mirror is very easy to get moldy and patchy after a few months.

Consequence:

• Black streaks and spots appear around the edge of the mirror.
• Mold spreads to brick or plaster walls behind.
• Costly to replace new mirrors, repair walls, loss of aesthetics.

How to fix:

• Choose a washbasin mirror with an even silver coating and a moisture-proof paint back.
• When installing, it is required to seal the edges with silicone glue to prevent moisture from entering.
• Do not hang mirrors too close to showers or areas where water frequently splashes.

Installing a mirror that is not balanced with the sink and wall

Many people choose mirrors based on their preferences, forgetting that the mirror must be in harmony with the sink and the wall area. A mirror that is too large compared to the sink will make the space unbalanced, while a mirror that is too small will be lost and lack emphasis.

Consequence:

• The overall bathroom is unbalanced and unaesthetic.
• A misaligned mirror can easily hit other equipment such as lights and shelves.
• Difficult to install tiles and electrical lines around the mirror.

How to fix:

• Measure the width of the sink accurately, choose a mirror that is equal to or about 1-2 cm smaller than the sink.
• Adjust the mirror hanging position before drilling, screwing or gluing.
• If you want a large mirror, consider adding wall lights and a mirror cabinet to create harmony.

Hang a mirror opposite the toilet or door

This is a common mistake, especially in small bathrooms. Placing a mirror opposite the toilet can be offensive and lack privacy. Hanging a mirror opposite the door can cause loss of privacy and, according to feng shui, can also cause loss of wealth.

Consequence:

• The reflection is unaesthetic and indelicate.
• Inconvenient for users.
• Contribute to making the space lack of layout harmony.

How to fix:

• Install the lavatory mirror directly above the sink, avoiding facing the door or toilet.
• If space is limited, a mirror can be installed at a slight angle.
• Use a mirrored cabinet with sliding doors instead of a flat mirror.

Installed a mirror with LED lights but had poor electrical connections.

The trend of using bathroom mirrors with integrated LED lights, sensors, and anti-fog heating is becoming more and more popular. However, many families install them themselves without considering underground electrical systems or safety standards. Exposed, non-waterproof electrical wires can easily cause electrical short circuits and be unsafe.

Consequence:

• Easy to leak electricity, potential risk of fire.
• Features like LED, heating, sensors are susceptible to damage if wet.
• Costly to repair, replace, and take time to dismantle.

How to fix:

• Install electrical wiring in the wall before hanging the mirror.
• Use waterproof wires and equipment with separate circuit breakers.
• Installed by a qualified electrician, in compliance with safety standards.

Conclusion

A standard bathroom mirror is not only about beautiful design or reasonable price but also depends greatly on How to installJust a few small mistakes can cause the mirror to quickly deteriorate, become moldy, and even become unsafe to use.

Make sure:

• Measure carefully and choose the right location.
• Choose a quality mirror with a moisture-proof coating.
• Arrange the electrical system safely when using LED mirrors.
• Prioritize hiring a professional, reputable installation unit to avoid future repair costs.

COMPANY INTRODUCTION

North: 3rd Floor, Golden Palm Building, 21 Le Van Luong, Thanh Xuan, Hanoi

Southern: NAMN Building, No. 10, Street 67, Tan Quy Ward, District 7, HCMC

Website: hiwinvietnam.vn

Facebook: facebook.com/hiwinvietnam.vn

Hotline: 1900571296